Battery Nail Penetration Test Chamber

Model

HUD-H207 

1. Inner box size

 400x400x500mm (width x depth x height)

2. Equipment dimensions

 700x700x1310mm (width x depth x height, including door lock)

3. Internal material

 SUS304 stainless steel plate, thickness 1.2mm, with Teflon affixed

4. External material

 1.5mm thick cold-rolled steel plate with paint treatment

5. Drive mode

 Mechanical drive

6. Control method

 push-button control

7. Pressure range

 1-300Kg

8. The maximum battery size tested

 200x200x200mm (width x height x depth)

9. Acupuncture stroke

 250mm

10. Steel needle specification

 high temperature resistant steel needle  2mm - 8mm, length 100mm

11. Holding time

 0-99H99 (H/M/S can be set arbitrarily)

12. Air source

 0.4MPa;

13. Pressure relief door size

 200x200mm, located at the back of the box When the sample explodes, the pressure relief port bounces to release the pressure

14. Piercing direction

 Pierce in the direction perpendicular to the battery plate.

15. Weight

 about 130kg

16. Power supply

 1, 220V, 50HZ, 300W