Battery Explosion Proof Test Chamber

Model

HUD-H203

1. Inner box size

 500x500x500mm (width x depth x height)

2. Dimensions

 680x750x1475mm (width x depth x height, including door lock)

3. External material

 cold-rolled steel plate with paint treatment, thickness 1.5mm

4. Internal material

 SUS 304 thickness 1.2mm

5. Number of cabinets

 2

6. Box door

 a single door opens to the left, and an explosion-proof chain is installed on the side of the box door

7. Teflon tape is attached to the inside of the box, which is effective in insulation and flame retardant, easy to clean

8. There are test holes on the left side of each layer of the box, which is convenient for the test connection line to pass through

9. Each test box has a lighting and smoke exhaust interface, and there is an interval design between each layer to avoid mutual influence on the test

10. Control mode

 button control 

11. Pressure relief door size

 200x200mm; Located at the back of the box, when the sample explodes, the pressure relief port will pop open to relieve the pressure

12. Smoke exhaust pipe

 diameter  100mm, located at the back of the box

13. Observation window

 Two-layer tempered glass with a size of 250x250mm, equipped with stainless steel mesh

14. Equipment movement

 There are four universal casters at the bottom of the equipment, which can move freely

15. Lighting device

 It is convenient to observe the state of the tested sample

16. Power supply

 1 AC220V 50-60HZ